Our Steeling Top Hat Section is made from Galvanised Steel and can be manufactured to your individual requirements.
Also available in stock lengths
Structural metal Top Hat Sections are a cost effective alternative to conventional purlins or timber on smaller type buildings like garages and small sheds. They are ideal to be used for wall girts and roof supports. They are fixed with the use of 14 x 22 metal TEK screws onto the columns and rafters through the bottom flange of the Top Hat Sections.
They have excellent spanning capabilities and are lap joined on longer runs.
Steeline Top Hat Sections are available in 3 different thicknesses allowing them to be used in many different applications to suit your requirements.
They are rollformed cut to length in thicknesses of 0.75 BMT, 1.0 BMT & 1.2 BMT. Made from hi-tensile Zincalume so you know they will stand the test of time. They comply with the Australian standards.
Product specifications
Used for
Provide long spans between portal frames on commercial buildings.
Made from
Pre-fabricated and punched Galvaspan® G450 – Z350 Steel.
Width and Depth
Width – 102, 152, 203, 254 & 300mm
Depth – 53, 65, 79 & 100mm
Material Thickness
1.0, 1.2, 1.5, 1.9 & 2.4mm
Lengths
Rollformed to length to your specification.
Girts – Bridging
See our Brochure for detailed information.
Accessories
Bolts, Adaptor Brackets, Clamp Plates, Angle Connectors and more.
Delivery
Call us to determine a time to suit your building schedule.
Additional resources
